Packers and Accessories
Retrievable Packers
Cut to Release Hydraulic Set Packer
Cut to Release Hydraulic Set Packer DESCRIPTION A-HRP9, A-438 – Cut to Release Hydraulic Set Packer This premium cut to release production packer is a hydraulically set, double grip retrievable packer for use in vertical and deviated wells. The standard version is suitable for high-pressure, high temperature environments, also available…
Hydraulic Retrievable Packer-Feed Thru
Hydraulic Retrievable Packer-Feed Thru DESCRIPTION A-HRP3-FT, A-248 – Hydraulic Retrievable Packer-Feed Thru The A-HRP3-FT packer is available either straight pull shear or cut to release configuration, with multiple control line bypass intended to be the uppermost packer in intelligent well completions where zonal isolation with line bypass is typically…
Hydraulic Retrievable Packer-High Pressure
Hydraulic Retrievable Packer-High Pressure DESCRIPTION A-HRPH, A-182 – Hydraulic Retrievable Packer-High Pressure The A-HRPH is a high pressure hydraulic set, double grip, retrievable packer. The A-HRPH does not require any mechanical manipulation of the production string to be set, making it optimal for situations where mechanical manipulation is not feasible.…
Retrievable Seal Bore Packer
Retrievable Seal Bore Packer DESCRIPTION A-RSBP, A-200 – Retrievable Seal Bore Packer The A-RSPB is a single or dual trip Hydraulic Set Retrievable Packer designed to withstand high full differential pressure while the seal assembly is latched into the packer. The Packer is equipped with Bi-directional slips and cones which…
Tension Set Retrievable Packer
Tension Set Retrievable Packer DESCRIPTION A-MR5, A-242 – Tension Set Retrievable Packer The A-MR5, is a single grip tension set retrievable packer, designed for shallow wells. It is simple and easy to use, set by quarter RH turn at the tool and application of tension to pack-off the rubber element.…
Mechanical Retrievable Packer for Tension, Compression and Neutral condition
Mechanical Retrievable Packer for Tension, Compression and Neutral condition DESCRIPTION A-TCN, A-165 – Mechanical Retrievable Packer for Tension, Compression and Neutral condition The A-TCN is a retrievable production packer that is set mechanically. The J-design that the Packer is equipped with, allows the packer to continue performing in Tension, Compression…
Mechanical set Double Grip Retrievable Packer
Mechanical set Double Grip Retrievable Packer DESCRIPTION A-MR3, A-151 – Mechanical set Double Grip Retrievable Packer The A-MR3 is a Mechanical set retrievable packer holds pressure from above and below. The Packer is set by application of quarter turn rotation, followed by slacking off weight onto the packer. Simple quarter…
Extra Large Bore Hydraulic Set, Retrievable Packer
Extra Large Bore Hydraulic Set, Retrievable Packer DESCRIPTION A-XHRP, A-166 – Extra Large Bore Hydraulic Set, Retrievable Packer The A-XHRP is a Hydraulically set, retrievable production packer. Designed specifically to have an Extra-Large ID for high producing wells. Its compact design allows for the packer to be deployed in vertical…
Hydraulic Retrievable Packer-with Slip Cage
Hydraulic Retrievable Packer-with Slip Cage DESCRIPTION A-HRP2, A-183 – Hydraulic Retrievable Packer-with Slip Cage The A-HRP2 is a hydraulic set, double grip, retrievable packer with compact construction, making it particularly suitable for deviated wells and multi packer completions. The A-HRP2 does not require any mechanical manipulation of the production string…
Hydraulic Retrievable Packer
Hydraulic Retrievable Packer DESCRIPTION A-HRP1, A-018 – Hydraulic Retrievable Packer The A-HRP1 is a hydraulic set hydrostatic assisted retrievable packer. The A-HRP1 does not require any mechanical manipulation of the production to be set, making it optimal for situations where mechanical manipulation is not feasible. The Packer is run to…
Squeeze Packer & Accessories
Retrievable Squeeze packer
Retrievable Squeeze packer DESCRIPTION A-RSP, A-100 – Retrievable Squeeze packer A-RSP is a compression set packer with hydraulic hold down that is provide additional dependability even in rough service conditions. The Hydraulically actuated upper dies, ensure that the packer does not move up during operation It is ideally suited for…
Storm Valve – Plug Type
Storm Valve – Plug Type DESCRIPTION A-SV1, A-188 – Storm Valve – Plug Type The A-SV1 is run above a compression set packer and provides a means of disconnecting the…
Safety Joint for Squeeze Packers
Safety Joint for Squeeze Packers DESCRIPTION A-SJSP, A-101 –Safety Joint for Squeeze Packers The A-SJSP Safety Joint is a means for backing off a work string from tools below. Right-hand…
Unloader Sub used with Service Packers
Unloader Sub used with Service Packers DESCRIPTION A-USSP, A-102 – Unloader Sub used with Service Packers The A-USSP is designed to be used in conjunction with Service Packers and to…
Permanent Packers
Hydraulic set Open Hole Packer
Hydraulic Retrievable Packer-High Pressure DESCRIPTION A-OHP, A-269 – Hydraulic set Open Hole Packer The A-OPH is a hydraulic set, single string Open Hole Packer, particularly useful in multizone well stimulation…
Permanent Seal Bore Packer
Permanent Seal Bore Packer DESCRIPTION A-PSP, A-263 – Permanent Seal Bore Packer Permanent Seal Bole high-performance and versatile retainer production packers are considered industry standards among permanent production packers, designed…
Hydraulic Set Permanent, Seal Bore Packer
Hydraulic Set Permanent, Seal Bore Packer DESCRIPTION A-HPSP, A-193 – Hydraulic Set Permanent, Seal Bore Packer The A-HPSP Hydraulic Set Permanent Seal Bole Packer is a hydro-Set Retainer Production designed…
Permanent Hydraulic Set Isolation Packer
Permanent Hydraulic Set Isolation Packer DESCRIPTION A-PHIP, A-294 – Permanent Hydraulic Set Isolation Packer The A-PHIP Permanent Hydraulic Set Isolation Packer is a Retainer production packer designed to withstand high…
Seal Bore Packers Accessories
SEAL STACKS
Seal stacks Standard Seal Stacks made up of nitrile chevron seals and steel spacer rings. Bonded Seal Stack Two nitrile or Viton seals are bonded to each metal insert. These…
Anchor Tubing Seal Assembly
Anchor Tubing Seal Assembly DESCRIPTION A-ATSA, A-195 – Anchor Tubing Seal Assembly The A-ATSA is designed to be used with the Seal Bore Packer. It features a ratch-latch Locking mechanism…
Locator Tuning Seal Assembly
Locator Tuning Seal Assembly DESCRIPTION A-LTSA, A-196 – Locator Tuning Seal Assembly Locator Tubing Seal Assembly is used to tie back an existing production seal bore packer to a location…
Mill Out Extension
Mill Out Extension DESCRIPTION A-MOE, A-169 – Mill Out Extension The A-MOE, provides a means for extending the bore of a Seal Bore packer, so as to accommodate the Packer…
Seal Bore Extension
Seal Bore Extension DESCRIPTION A-SBE, A-168 – Seal Bore Extension The A-SBE, A Seal Bore Extension is run to provide additional sealing bore when a long seal assembly is run…
Tools & Accessories
Junk Basket for Debris
Junk Basket for Debris DESCRIPTION A-JB, A-217 – Junk Basket for Debris The A-JB Junk/Boot basket provides an easy and effective way to trap heavy cuttings during milling operations. The…
Expansion Joint Splined
Expansion Joint Splined DESCRIPTION A-EJS, A-209 – Expansion Joint Splined The A-EJS is a combination tool that acts like a telescoping sub or a swivel sub. This is a reliable…
Pulling Tool for Retrievable Seal Bore Packer
Pulling Tool for Retrievable Seal Bore Packer DESCRIPTION A-PTRSB, A-229 – Pulling Tool for Retrievable Seal Bore Packer The A-PTRSB is designed to retrieve the A-RSBP Seal Bore Packers from…
Hydraulic Setting Tool
Hydraulic Setting Tool DESCRIPTION A-HST, A-153– Hydraulic Setting Tool The A-HST, Hydraulic Setting tool, is a Hydraulically actuated tool, that is used to set Packers, Bridge Plugs and Cement Retainers.…
On-Off Seal Assembly
On-Off Seal Assembly DESCRIPTION A-OOSA, A-093 – On-Off Seal Assembly The On-Off Seal Assembly is a Left hand release tubing disconnect device. It features internal landing nipple profiles (F, X,…
Rotating Reciprocating Casing Scrapper
Rotating Reciprocating Casing Scrapper DESCRIPTION A-RRCS, A-154 – Rotating Reciprocating Casing Scrapper A-RRCS Casing Scraper is designed to remove foreign matter and built up namely cement sheath, imbeds, perforation burrs,…
Tubing Anchor Catcher
Tubing Anchor Catcher DESCRIPTION A-TAC, A-355 – Tubing Anchor Catcher Tubing Anchor Catcher is mechanically actuated to anchor tubing string into the host casing. Acts as an anchor to the…
Hydraulic Anchor Catcher
Hydraulic Anchor Catcher DESCRIPTION A-HTCA, A-253 – Hydraulic Anchor Catcher The A-HTCA is a hydraulically activated retrievable anchor designed to hold the tubing / casing string in tension or compression.…